A Bumpy Ride (Strut Assembly Replacement)
October 5, 2025
If you’ve noticed your vehicle’s ride has lately been bumpy or you’re hearing strange noises when you drive over bumps, you may need new struts. The strut assembly is part of your vehicle’s suspension system that’s used to absorb the irregularities on the surfaces you drive on.
You have probably heard of shocks or shock absorbers. A shock is a piston with gas or liquid inside. When you hit a bump, that shock absorbs the blow. Struts are similar to shocks but they also have a coil spring for extra strength. They’re often used in the front of the vehicle because of the engine’s extra weight.
As you might imagine, your struts take a beating every day. Eventually, they will wear out, and your wheels and tires won’t stay connected to the road as well as they used to. In addition to a bumpier ride, you may notice your tires starting to wear with failing struts because those tires aren’t in contact with the road surface as evenly as they used to be.
When you bring your vehicle in to us, we’ll run some tests to determine what’s going on and what condition your suspension components are in. Your vehicle’s manufacturer recommends struts to be replaced at certain intervals, and it’s important to change them out with the same type of equipment. They should always be replaced in pairs on the same axle.
After your struts are replaced, your suspension should be aligned so everything is headed down the road in the right direction. After that, driving should be smooth sailing.
Auto Lab Livonia
36251 Five Miles Rd
Livonia, MI 48154
734-432-6000
http://www.autolablivonia.com
Need Service?
More articles from Auto Lab Livonia
Timing Cover Replacement
June 14, 2026
Your engine has a lot of parts that need to work in harmony in order to keep you powering down the road. Some of those parts need to be protected in order to keep things running smoothly, and one that does the job is called a timing cover. It is in the front of your engine and shields components... More
Out of Joint (CV Joint and Boot Replacement)
June 7, 2026
If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for constant velocity. In essence, its a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels. When you turn the ... More
Go with the Flow (MAF Sensor Replacement)
May 31, 2026
If your vehicle has an internal combustion engine, it depends on two things to make propulsion power for you to be able to motor on down the road: fuel and air. The engine mixes the two in just the right proportion so that they can be ignited, creating a series of tiny explosions that are coordi... More